Double line automatic signalling

Double Line Automatic Signalling is a form of railway signalling used on the majority of double line sections in New Zealand. Double Line Automatic Signalling uses track circuits to detect the presence of trains in sections broken up by intermediate signals. Usually there is an 'up' and a 'down' main line, and beyond station limits the lines are not bi-directionally signalled. DLAS is not designed for wrong-line running in emergency situations.^[1]

Junctions or points edit

At junctions or points, one of or both mains signals are usually controlled either remotely (by a Train Controller or Signalmen) or switched in at a local panel.

Sidings edit

Sidings off one or both mains are usually operated by switchlock lever points secured by padlock and track circuit presence that enables a release to be given before points can be operated.

Areas of use edit

Papakura - Amokura
Te Kauwhata - Hamilton.
Trentham - Kaiwharawhara
Kaiwharawhara - South Junction
North Junction - Waikanae
Islington - Heathcote

Formerly double line edit

Islington - Rolleston
Mosgiel - St Leonards

References edit

^ "Report 08-110 train control operating irregularity leading to potential low-speed, head-on collision Amokura 23 September 2008". Retrieved 28 November 2020.

[1] "Report 08-110 train control operating irregularity leading to potential low-speed, head-on collision Amokura 23 September 2008". Retrieved 28 November 2020.

[1]