Lashing (ropework)

(Redirected from Diagonal lashing)

A lashing is an arrangement of rope, wire, or webbing with linking device used to secure and fasten two or more items together in a somewhat rigid manner. Lashings are most commonly applied to timber poles, and are commonly associated with cargo, containerisation, the Scouting movement, sailors, and gardeners.

Bamboo scaffolding secured with lashings in Kowloon.

It has been imagined that the first lashing made by humans was wrapping a few strips of bark around a stone to hold it to a tree branch to make an ax to hunt and build with.[citation needed] In modern times, the same methods are used, but strips of bark and vines have been replaced with natural and synthetic fiber ropes. Scouts and campers use lashings to build camp gadgets and improve their campsites for comfort and convenience, including the building of rafts for transport and competitive events. Lashings are also used in pioneering, the art of creating structures such as bridges and towers, using ropes and wooden spars.

There are still areas in the world where lashing spars (or poles) is the basic means of building.[citation needed]

Types

edit
 
A square lashing binding a wooden spar to a tree trunk. The rope turns between the tree and spar are the frapping.

Square lashing

edit

Square lashing is a type of lashing used to bind spars together, at right angles to one another. There are different types, but all consist of a series of wraps around the spars, and frapping around the line running between the spars.[citation needed]

Diagonal lashing

edit

Diagonal lashing is a type of lashing used to bind spars or poles together, to prevent racking. It gets its name from the fact that the wrapping turns cross the poles diagonally and is used to spring poles together where they do not touch as in the X-brace of a trestle.[1]

Shear lashing

edit

Shear lashing (two-spar shear lashing) also spelled "sheer lashing" is used for lashing together two parallel spars which will be opened out of the parallel to form sheer legs as in the formation of an A-frame. The clove hitch is tied around one leg only and frapping turns are taken between the poles.[2]

Round lashing

edit

The round lashing is most frequently used to join two poles together to extend their length. Typically, two lashings are used a reasonable distance apart for extra strength. In the simple version, a clove hitch is tied around both poles and there are no frapping turns.[3]

The nautical term gammon means a round lashing of rope or iron hardware to attach a mast to a boat or ship.[4]

Tripod lashing

edit

The tripod lashing (also known as gyn lashing, figure of eight lashing, and three-spar shear lashing) is used to join several spars together to form a self supporting structure. If the lashing is tied around three spars, then the structure is called a tripod, but quadpods can also be made by using four spars.[citation needed]

See also

edit

References

edit
  1. ^ Green, Larry (December 14, 2014). "Traditional Diagonal Lashing". scoutpioneering.com.
  2. ^ Green, Larry (October 14, 2013). "The Somewhat Ambiguous Shear Lashing".
  3. ^ Green, Larry (January 27, 2014). "Four Different Lashings to Extend the Length of a Spar".
  4. ^ "Gammon lashing". Oxford Reference. Retrieved November 26, 2022.
edit