Buckling spring

(Redirected from Buckling-spring)

A buckling spring is a type of keyswitch mechanism, popularized by IBM's keyboards for the PC, PC/AT, 5250/3270 terminals, PS/2, and other systems. It was used by IBM's Model F keyboards (for instance the AT keyboard), and the more common Model M. It is described in U.S. patent 4,118,611 (Model F) and U.S. patent 4,528,431 (Model M), both now expired. According to the original patent: "A non-teasible, snap action, tactile feedback, key mechanism of extreme mechanical simplicity and high reliability is achieved."[1]

Unicomp Model M with removed z key. The exposed buckling spring is visible.

Operation

edit

The coil spring tensed between the keycap and a pivoting hammer buckles (i.e. kinks or collapses) at a certain point in its downward traverse, providing auditory and tactile feedback to the keyboard operator. Upon buckling, the hammer is pivoted forward by the spring and strikes an electrical contact which registers the key press. In a Model M, the electrical contact is a membrane sheet similar to that of a modern dome switch keyboard.

edit

See also

edit

References

edit
  1. ^ US4118611A, Harris, Richard Hunter, "Buckling spring torsional snap actuator", issued 1978-10-03 
edit