Base bleed

Base bleed or base burn (BB)^[1] is a system used on some artillery shells to increase range, typically by about 20%–35%. It expels gas into the low-pressure area behind the shell to reduce base drag (it does not produce thrust; if it did it would be a rocket-assisted projectile). Since it extends the range by a percentage, it is more useful on longer-range artillery where an increase of approximately 5–15 kilometres (3.1–9.3 mi) can be achieved, and it also was found that the reduced turbulence gave the projectiles a more consistent trajectory, resulting in tighter grouping, and efficient shelling more than 40 kilometres (25 mi) away.

Diagram of a base bleed unit. The top diagram shows the bottom of the shell and the location of the gas vents. The bottom diagram is a cut-away view showing the gas generator mechanism.

Base bleed technology was developed in Sweden in the mid-1960s but took some time to spread and find its niche between cheaper classical ordnance and even more expensive rocket-assisted projectiles. It is now a fairly common option.^[2]^[3]

Function

Most (50–60%) of the drag on an artillery shell derives from the nose portion of the shell. Artillery shells travel through the air at supersonic speeds; as the shell pushes the air out of its way, it creates shock waves that bleed off the shell's kinetic energy and therefore reduce its airspeed. Shaping the shell properly effectively reduces this component of drag; however, in regular flat-base artillery shells, the other large component is the so-called "base drag", caused by the low-pressure ("suction") area created directly behind the shell as it travels through the air.

Base drag can be reduced --without significantly extending the base of the shell or profiling it (as is done with sabot projectiles) by adding a small ring of metal extending just past the base, and placing a small gas generator to the rear part of the shell. The gas generator provides little to no thrust, but fills the vacuum in the area behind the shell with an inflow of gas, dramatically reducing drag.

This means that, at a cost of only very little space to fit the gas generator in the casing,

a longer effective firing range can be achieved with the same amount of propellant
less propellant is needed to achieve the same effective range as with normal munitions
heavier shells can be fired to the same effective range

History

The principles were developed in Sweden in the mid-1960s by the Försvarets forskningsanstalt (abbreviated FOA) and the Artillery bureau at the Kungliga Materielförvaltningen (later the Försvarets Materielverk (FMV)) while working on a rocket-assisted projectile called "reatil". Their goal was to increase the range of coastal artillery.^[4] By 1966, it had been concluded that a small slow-burning charge at the base of the projectile would alleviate the low pressure behind the shell, hence increasing the range by lessening the difference between the pressure due to aerodynamic drag on the nose of the shell and the low pressure behind the base. The first full-scale tests took place in 1969 with modified 10.5 cm steel shells, with excellent results, and the Swedish patent was granted to FOA in 1971 although both application and patent were classified. Since the development was done, the patent was transferred to FMV for procurement to the armed forces of Sweden.

The concept was quickly implemented into the 7.5 cm sjömålsgranat m/66 (7.5 cm anti-ship shell m/66) used in the 7.5 cm tornpjäs m/57 fixed coastal artillery gun, and then rapidly into all anti-ship shells in the Swedish military.

Since FMV was to contract a company in the US to manufacture the gas generator for the 12 cm sjömålsgranat m/70 (12 cm anti-ship shell m/70), used in the 12 cm TAP m/70 fixed coastal artillery gun, the classification secret was removed from the patent. Shortly thereafter the international rights were sold, eventually ending up with the Space Research Corporation (SRC), then owned by aeronautical engineer Gerald Bull.

By the end of the 20th century, the technology was generally available world-wide.

References

^ ^a ^b Nguyen, Ductri (30 August 2011). "M1128 Insensitive Munition High Explosive Base Burn Projectile" (PDF). Department of the Army. Office of the Project Manager for Combat Ammunition Systems. Archived from the original on 13 May 2015. Retrieved 7 April 2023.{{cite web}}: CS1 maint: bot: original URL status unknown (link) ( Public domain)
^ "155 mm HE ER FB-BB (OFd M3-DV)". MSM GROUP. Retrieved 29 July 2022.
^ YAKOUT, HASSAN; ABDEL-KADER, MOHAMED S. (14–16 May 1991). ASSESSMENT OF ERFB-BB PROJECTILE (PDF). FOURTH ASAT CONFERENCE. CAIRO, EGYPT: MILITARY TECHNICAL COLLEGE. MF-366. Archived (PDF) from the original on 2019-04-29.
^ Grenander

Bibliography

Gibson, Chris (2023). "It's All About that Base". The Aviation Historian (42): 122–129. ISSN 2051-1930.
Grenander, Gunnar (1987). Vapenlära för armén (in Swedish). Stockholm: Liber. ISBN 91-38-09025-2.
Hansson, Lars (2008). ERSTA - Från svarvspån till byggnadsminne (in Swedish). Nyköping: LAH Bunkertours. ISBN 978-91-977297-0-3.

External links

Army researchers add power, range to artillery Picatinny Arsenal

[nguyen11-1] Nguyen, Ductri (30 August 2011). "M1128 Insensitive Munition High Explosive Base Burn Projectile" (PDF). Department of the Army. Office of the Project Manager for Combat Ammunition Systems. Archived from the original on 13 May 2015. Retrieved 7 April 2023.{{cite web}}: CS1 maint: bot: original URL status unknown (link) ( Public domain)

[2] "155 mm HE ER FB-BB (OFd M3-DV)". MSM GROUP. Retrieved 29 July 2022.

[3] YAKOUT, HASSAN; ABDEL-KADER, MOHAMED S. (14–16 May 1991). ASSESSMENT OF ERFB-BB PROJECTILE (PDF). FOURTH ASAT CONFERENCE. CAIRO, EGYPT: MILITARY TECHNICAL COLLEGE. MF-366. Archived (PDF) from the original on 2019-04-29.

[Grenander-4] Grenander

[1]

[2]

[3]

[4]